• head_banner_01

hot dip galvanizing crossarm

Short Description:


Product Detail

Product Tags

Product Description:

Custom processing: Yes

Specifications 50*5, 63*6, 75*8, 80*8 can be customized

Type Ironwork

Surface treatment galvanized

Scope of application

Product introduction: The hot-dip galvanized cross arm is an important power fastener used in the poles and towers in the overhead lines. It is the angle iron fixed laterally on the top of the poles; the cross arms are used to support the lines, lightning protection lines and installations in the overhead lines. Insulators and supporting power fittings, and keep them at a safe distance in accordance with regulations.

The hot-dip galvanized angle steel cross arm has also become a single pole cross arm. The main raw material is equilateral angle steel, and its specifications are named according to the size of the angle steel and the length of the cross arm.

Use of cross arm: Hot-dip galvanized cross arm is usually installed at about 300mm from the top of the pole. The straight cross arm should be installed on the receiving side, and the cross arm of the corner pole, terminal pole and branch pole should be installed on the side of the cable. According to different types of hot-dip galvanized cross arm force characteristics: single cross arm is suitable for straight poles or corner poles below 15°; corner poles, tensile poles, terminal poles, and branch poles with angles above 15 degrees all adopt double cross arms . (In some areas, double crossarms are used for poles)

Single pole cross arm

Such as: ∠63×6×1800. It is used for the installation of single poles on transmission lines of 10kV and below. According to the installation, it is divided into single cross arm and double cross arm. Note: When ordering, the specification and model of the single-pole crossarm and whether to add support rod holes or provide drawings must be specified.


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Parallel groove clamp

      Parallel groove clamp

      Model JBB, JBL, JBTL Custom processing: Yes Product use Cable fixed wire Material Aluminum alloy Process low pressure casting Product description: The parallel groove clamp is used for the connection of small and medium cross-section aluminum stranded wire or steel core aluminum stranded wire and the steel stranded wire of overhead lightning protection wire at a position that does not bear tension. It is also used for the jumper connection of non-linear poles. Power engineering materials (fit...

    • hot dip galvanizing crossarm

      hot dip galvanizing crossarm

      Product Description: Custom processing: Yes Specifications 50*5, 63*6, 75*8, 80*8 can be customized Type Ironwork Surface treatment galvanized Scope of application Product introduction: The hot-dip galvanized cross arm is an important power fastener used in the poles and towers in the overhead lines. It is the angle iron fixed laterally on the top of the poles; the cross arms are used to support the lines, lightning protection lines and installations in the overhead lines. Insulators and supp...

    • Copper nut

      Copper nut

      Product Name: copper nut   Product specifications: m1.6, M2.5, m3, M4, M5, M6, M8, M12, M14, M16, etc   Surface treatment: copper plating   Product grade: grade 4.8   Product application: copper nut, also known as embedded nut and inlaid copper nut or plastic embedded nut, can be divided into hot-melt copper nut, hot pressed copper nut, embedded copper nut and ultrasonic copper nut according to different application methods   The product is widely used in the embedded...

    • PT hanging plate

      PT hanging plate

      Product description: 1. The PT adjustment board belongs to the connection fittings in the power fittings, and is an adjustable parallel hanging plate    Parallel hanging boards are used to connect single board to single board and single board to double board. It can only change the assembly length, not the connection direction. Parallel hanging boards are mostly made of medium-thick steel plates by stamping and cutting processes. The finalized parallel hanging boards are divided into single...

    • scaffold

      scaffold

    • Galvanized double head bolts

      Galvanized double head bolts

      Product name: Galvanized double head bolts   Product model: 16 * 35, 16 * 250, 16 * 280, 18 * 330, 20 * 350.   Material grade: carbon steel   Product application: Galvanized double head bolts can be used for large mainframes, requiring mirror surface, mechanical seal seat stud bolts, reducer frame and other equipment accessories. At this time, stud bolts are used. Screw one end into the main body. After the accessories are installed, install the nut on the other end. As the acc...