• head_banner_01

Quick support screw adjuster

Short Description:

Product Detail

Product Tags

Product Description


The production of solid jacking material is generally made of threaded steel and brand-new round steel Q235, and the production of hollow jacking material is generally made of extruded steel pipe.

In fact, the processing technology we usually say is actually the solid jacking processing technology, which is generally divided into hot rolling and cold rolling. Hot rolling is to pass the steel bar through the plain grain first, then through the high-frequency furnace, and then heat it too much, and then roll it. Cold rolling is to directly roll the steel bar after plain grain.

The jacking models are complete and can support special-shaped customization. The jacking produced by us is sent to all parts of the world, which has made great contributions to local construction projects and has been unanimously recognized by the majority of users.

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Top support and bottom support

      Top support and bottom support

      Product Description >>> The scaffold specification stipulates that the extension length of the adjustable base and adjustable support screw of the full support frame shall not exceed (300) mm, and the length inserted into the vertical rod shall not be less than (150) mm. Jacking, an indispensable and important building tool in the process of scaffold erection and use, plays an important role. It plays th...

    • Manufacturer direct selling turnbuckle scaffold manufacturer

      Manufacturer direct selling turnbuckle scaffold...

      Product Description >>> The turnbuckle scaffold is a new type of scaffold, which was introduced from Europe in the 1980s. It is an upgraded product after the bowl buckle scaffold. It is also known as chrysanthemum disc scaffold system, plug-in disc scaffold system, wheel disc scaffold system, buckle disc scaffold, layer frame and Leia frame, because the basic principle of the scaffold is invented by layh...

    • screw


      Product Description >>> The split screw is used for the tie between the inner and outer formwork of the wall to bear the lateral pressure and other loads of the concrete, so as to ensure that the spacing between the inner and outer formwork can meet the design requirements, and it is also the fulcrum of the formwork and its supporting structure. Therefore, the arrangement of split bolts has a great impac...

    • Pull piece stereo

      Pull piece stereo

      Product Description >>> The split piece is generally used as a formwork support auxiliary tool for vertical components such as wall columns supported by small steel formwork Generally, the style of pull tab is a section of 10-12 reinforcement in the middle. One or both ends are welded with small steel sheets with holes, which are clamped in the joint between two steel molds. The holes of the steel sheets...

    • Aluminum template fastener

      Aluminum template fastener

      Product Description >>> Astener generally refers to the intermediate connecting part connecting two components, which is mostly used for external diameter in construction engineering Φ For the fixation of 48mm steel pipe scaffold, the fasteners are divided into right angle fasteners (cross fasteners and directional fasteners), rotary fasteners (movable fasteners and universal fasteners), butt fasteners (...

    • Aluminum formwork pin architectural aluminum formwork pin

      Aluminum formwork pin architectural aluminum fo...

      Product Description >>> Product nickname: aluminum template pin, aluminum template pin, aluminum template pin Pin material: Q235 Pin material: Q235, 45# steel Pin specifications: 16 * 52, 16 * 54, 15 * 125, 16 * 140 (solid pin, imitation solid pin) Pin specification: 3 * 70 ribbed, 3.5 * 70 bent pin Surface treatment: natural color, galvanized, color plated Function of pin: it is used for assembly and co...