Massive Selection for Rear U Bolts - Type 7 hot dip galvanized bolts can be customized – Chuan Ding

Product Description

>>>

The 7-shaped bolt is a kind of bolt used on the construction site, with a shape of 7-shaped. It is also called reinforced anchor plate anchor bolt, welded anchor bolt, anchor claw anchor bolt, tendon plate anchor bolt, anchor bolt, anchor screw, anchor wire, etc. It is specially buried in concrete foundation and used as the base for fixing various machines and equipment. The 7-shaped anchor bolt is one of the most commonly used anchor bolts. Q235 steel is generally used for manufacturing, and Q345B or 16Mn materials are used for processing with high strength, and 40Cr materials are also used for processing products with 8.8-grade strength, and secondary or tertiary threaded steel is occasionally used for processing. Anchor bolts are divided into wool, thick rods and thin rods in different forms. Wool, that is, raw material steel, is directly processed from round steel or wire without restructuring. The thick rod is also called Type A, and the thin rod is also called Type B, all of which are made of steel after being reformed into the required rod diameter. Welded anchor bolts are made by welding a stiffened iron plate with a single head bolt. Its pull-out resistance is strong. According to different conditions of use, they can reach 3.6, 4.8, 6.8, 8.8, etc. The tensile capacity of grade 3.6 7-shaped anchor bolts is the tensile capacity of the steel itself. The tensile strength of anchor bolts directly processed with Q345B or 16Mn raw materials can reach 5.8 grade tensile strength.

Standards

>>>

1. Standards for the size of stainless steel fasteners: specify the content of the basic size of the product; products with threads.

2. Not standard on product technical conditions. Specifically, it includes the following standards:

Fastener product tolerance standards: specify the product size tolerances and geometric tolerances.

3. Standards on mechanical performance of fastener products: specify the marking method of product mechanical performance levels and the content of mechanical performance items and requirements; some fastener products will change this content to product material performance or work performance Aspect content.

4. Standards for surface defects of fastener products: specify the types and specific requirements of product surface defects.

5. Surface treatment standards of fastener products: specify the types and specific requirements of product surface treatments.

6. Standards for fastener product testing: specify the content of the above-mentioned various performance requirements testing.